Are you looking for various different ways to how to make dull plastic shine? Do you want to give the dull plastic a reflective shine, much like a ¨wet¨ look? If you are, you have come to the right place!
Contrary to popular belief, plastic polishing, just like metal polishing, can be done by even the mentally challenged. Now, plastic units and appliances can get scratches on (>>> Check best coatings to avoid headlights scratches) and stains quite easily. Hence, if you want to restore the plastic to its former glory, it is imperative for you to polish the plastic frequently.
Without straying away from the topic any further, here are some basic and simple ways to make dull plastic shine!
Yes, you read it correctly! You can use toothpaste to polish plastic. Basically, all you will need to do is to apply a small amount of toothpaste on a cotton pad. Then, you can scrub away the area to be polished. After you are done with the polishing, you can rinse it off with cool water. Toothpaste, in this instance, works as a mild abrasive.
How about using a banana and a glass cleaner?
To get started, you will require a banana with its peel and a glass cleaner. So, how does this method work? Well, firstly, you should peel the banana and cut off a chunk. After that, you should proceed to rub the plastic with the cut end of the banana. You should only rub the banana in a circular motion. While doing so, you should be careful to not crush the banana. After the application of the banana, you should take its peel and wrap it around your finger. Then, you can proceed to wipe the plastic surface with it. After you are done polishing, you should remove the banana residue with a clean towel. But, wait! You are not done just yet. You should also gently spray the plastic down with a glass cleaner and wipe off to make the dull plastic shine.
Using liquid metal polish
You can also expertly use liquid metal polish to restore the shine of the plastic. However, you should be careful when using liquid metal polish; we would advise you to use protective gloves when dealing with liquid metal polish.
Now, the question arises—how can you polish the plastic with liquid metal polish? Well, firstly, you should shake the polish bottle well. Then, you should put a drop of the polish on a clean rag. After that, you should dab the areas you want shone, and then proceed to rub the areas in a circular motion. How long should you continue rubbing you ask? Well, the general rule of thumb suggests that you should do it for not less than 20 minutes. Of course, the duration also largely depends on the depth of the scratch or the severity of the condition. After you are done rubbing, you should rinse the plastic off with cold water and buff it clean with a lint-free towel.
You should only resort to using sandpaper if your plastic is in a very bad condition. In order to go through with this process, you will require sheets of sandpaper with different grit sizes. In addition to that, you will also require a plastic polish and a plastic cleaner. Our aim is to use wet sanding. Therefore, it is necessary for you to soak the sandpaper in water before using it. After you are done doing that, you should gently sand the surface with the lowest grit sandpaper, and slowly work towards the highest. Then, you should buff with a soft towel (>>> Check our guide of best paint buffers) and rinse the plastic with a plastic cleaner. After that, you should buff with the plastic polish and rinse again.
Are you aware of the fact that the plastic gadgets in your home can be fully restored to its former self? And, all you will need is a dab of Vaseline. A petroleum jelly or any ointment which uses a petroleum base can be expertly used to shine dull plastic. You will simply need to rub the jelly onto the plastic, leave it untouched for a minute or so, and then wipe it off. And, voila, your dull plastic isn´t dull anymore.
More useful tips:
How to clean aluminum rims with household products: https://nanocareproducts.com/how-to-clean-aluminum-rims-with-household-products/